JdcProducts.com shall not be held liable for any improper or incorrect use of the information described and/or contained herein and assumes no responsibility for anyone's use of the information. In no event shall JdcProducts.com be liable for any direct, indirect, incidental, special, exemplary, or consequential damages however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this system, even if advised of the possibility of such damage. This disclaimer of liability applies to any damages or injury, including but not limited to those caused by any failure of performance, error, omission, interruption, deletion, defect, replication, delay in operation or transmission; whether based upon negligence, tortuous behavior, or under any other cause of action.
No soldering, welding, gluing, or metal fabrication is necessary to build this hho / hydrogen generator dry cell!

Drill and drill press are the only power tools required to build!

Utilizes unmodified stainless steel washers as plates!

Complete listing and purchase links included for all the materials and tools needed!

Includes printable tension plate bolt hole guide which means no measuring needed when drilling bolt holes!

Picturial tutorial with descriptions of cell build from start to finish!​​
​​​
Perfect cell for science fairs or small scale mpg boosting experimentation!​

Link multiple cells together for increased production​​!

Designed for 12 - 14.5 volt dc power sources!​​

25-100 watt power rating​​​​!

Pre-assembled 25 plate design is setup as follows: (+NNNNN-)​​

3/8" hose barb adapters included with assembled cell!

FREE how-to plans included with assembled cell purchase!​​


Plans will be sent 1-24 hours after purchase to the email address provided dur​​ing checkout.  ​All measurements and parts are listed in U.S. Standard Units.

Please allow up to 10 business days for shipment of assembled cell orders.​​





​​​​​​
Drill and drill press are the only power tools required to build!

7 Plate design!

Utilizes commonly found stainless steel condiment or sauce cups as plates!

Complete listing and purchase links included for all the materials and tools needed!

Includes printable tension plate bolt hole guide which means no measuring needed for bolt holes!

Picturial tutorial with descriptions of cell build from start to finish!​​
​​​
Perfect cell for science fairs or small scale mpg boosting experimentation!​

Link multiple cells together for increased production​​!

Designed for 12 - 14.5 volt dc power sources!​​

25-180 watt power rating​​​​!

Pre-assembled 7 plate design is setup as follows: (+NNNNN-)​​

3/8" hose barb adapters included with assembled cell!

Assembled cell will feature LimeGreen colored gaskets!​​

FREE how-to plans included with assembled cell purchase!​​

Plans will be sent 1-24 hours after purchase to the email address provided dur​​ing checkout. ​All measurements and parts are listed in U.S. Standard Units.

Please allow up to 10 business days for shipment of assembled cell orders.​​
International Orders $38.95 + Free Shipping
United States Orders 28.95 + Free Shipping
Stop hundreds of flashbacks!

No bronze wool, sand, or air stone used in the construction!

Recommended for HHO / Hydroxy systems up to .5 - 4 liters per minute!

Features replaceable seal gaskets eliminating the need for thread seal tape or silicone when replacing hose barbs!

Install in either direction, not a one way design!

No need to wet the arrestor, recommended to use dry!

Maintenance free if instructions are followed!

Features a high strength chip resistant coating!

Your choice of the most common barb sizes!

Now shipping within the United States and Internationally!
*International orders please use the checkout option to the right

Items are built by hand and as orders are placed. Please allow 1-3 business days after order is placed for shipment due to cure time and quality control. Orders will be shipped via USPS.

* It is also recommended to install a heavy duty one-way / check valve after the a​rrestor as an added safety measure. Your HHO system should be setup as follows: (HHO Cell, Reservoir, Safety Bubbler, Arrestor, Check Valve, Gas Exit Tube)

Plan set features a full How-To Pictorial Tutorial as well as direct purchase links for all the tools and parts needed to build this HHO Flashback Arrestor.

How-To Plans will be sent 1-24 hours after purchase to the email address provided during checkout .
​All measurments and parts are listed in U.S. Standard Units. 


PRODUCTS
Quickly and accurately measure the Liters-Per-Minute output of your Hho / Hydroxy / Generator Cell.

Remotely launch empty soda bottles 50-100 feet into the air to demonstrate the absolute POWER locked up inside of  water. ​

​Remotely ignite balloons filled with hho gas to create chest felt BOOMS to open the eyes of disbelievers and beginners to the potential of water as a primary source of Hydrogen.

The HM1000 ​​was designed to easily store on a shelf or inside the trunk / toolbox of an automobile which can quickly be used to run output tests or demonstrations of your Hydroxy setup.
​​

Pre-built units are ready to use straight out of the box and will include: 20 feet of ignition wire, batteries needed for the spark generator, a package of balloons,  and the necessary hose barbs. 

*Although we try to ship out as quickly as possible, please allow  up 10 business days for shipment.


The HM1000 plan set will include: A full length How-To-Video from start to finish on how to build the device​​​, A pdf file which will include a list of the tools and parts needed, and direct links to where most of the items can be purchased if not available locally. Plans will be shipped out 1-3 business days from date of purchase.

Note* All measurements and parts are listed in U.S. Standard​​ Units


​​


HM1000 How-To-Video Plans
$20.00 + Free Shipping Worldwide​
Assembled HM1000
$159.95 + Free Shipping

*Orders outside the U.S. please use "International" checkout option.​
HHO Generator Washer Dry Cell How-To Plans
$10.00  Digital Email
TLWT 2.0
The LiL Water Torch 2.0 is the perfect HHO / Hydroxy / OxyHydrogen / Browns Gas micro torch that can be used by home hobbyist, craftsman, jewelers, plumbers, experimenters, ect. With a flame that can reach thousands of degrees you can easily solder, braze, cut, weld, melt, and fuse all sorts of metals, glass, and even stones.

​​​​All-in-one design features : 316L stainless steel 7 plate Zero Current Leakage(+nnnnn-) hydroxy dry cell, 1 quart water reservoir, condensation trap, two-stage safety gas bubbler, flashback arrestor, gas shutoff valve and heavy duty micro pen torch with multiple tips.(See item at the bottom of the products page for more details.)  ​​All exterior hardware including the brackets are made of high quality corrosion resistant stainless steel. 

No holes in stainless steel plates creates a Zero Current Leakage design​​ which results in higher gas output efficiency levels as well as lower operating temperatures.

On demand hydrogen gas means that you will never need to transport or store compressed tanks of gas. Since water is used as the source of the hydrogen gas, you will only need to top the reservoir off with distilled water as needed. Burning of hydrogen gas emits no harmful fumes or compounds, in fact, the only by-product of burning hho fuel is simply, clean and pure water vapor. ​​

System can be directly installed in the trunk or interior of an automobile​​ for experimentation with mpg boosting of small engines. All components can also be easily removed to be installed in the engine bay if desired.

Power requirements: 12-14.5 Volts DC @ 5-15 amperes. 
(Use drop down menu to order a high quality bench top DC power supply. Constant 13.8 volts DC or variable @ 5-15 volts with allows control of flame and gas output. ​Includes built in voltage and amperage meters.)

​Electrical power can be derived from any 12-14.5 volt dc source including but not limited to: battery, automobile alternator, solar panel array, cb / ham radio power supply, and pc power supply. (Power supply should be rated at 250 watts or more) 

Full instruction set and electrolyte are included with the system. Distilled water and power supply are not included. ​​

Dimensions of assembled unit: ​​8" W, 15.5" H, 6" D 

​​​Gas Output: 60 Liters Per Hour @ 13.5 Volts DC @ 15 amperes.

Please allow up to 10-14 business days for shipment.
​​​​​



​​​​
The LiL Water Torch 2.0 (Fully Assembled)
​​$499 + Free Shipping

*Orders outside the U.S. Please use "International" checkout option​
Assembled HHO Washer Dry Cell
$99.95 + Free Shipping​

*Orders outside the U.S. please use "International" checkout option.​​
Quantity
Barb Size
Quantity
Barb Size
NEW!
​ DIY HHO Flashback Arrestor How-To Plans
$10.00 Digital Email​
Quantity
Quantity
HHO Generator Condiment Cup Dry Cell How-To Plans
$10.00  Digital Email
Assembled HHO Condiment Cup Dry Cell
$129.95 + Free Shipping​

*Orders outside the U.S. please use "International" checkout option.​​
Gas Inlet Barb Size
Micro hho / hydrogen generator to be used for education or demonstration purposes!

Powered by 2 C-cell batteries with included quick connect power box!

Detachable reservoir and starter amount of electrolyte included!

Intrigue and entertain young minds by creating and popping flammable gas bubbles using the included tubing and stainless steel bubble cup!

Set up model on a shelf or desk to be used as a conversation starter or art piece!

Perfect item as a gift or ​​​​education model!

Full instruction set included with purchase!​​


FREE digital how-to plans included with purchase to build the 12 volt versions of the JdcProducts stainless steel condiment cup and washer dry cells!

Dimensions including base: 4.5" W, 6" H, 4" D.

Please allow up to 10 business days for shipment. ​​

​​
Assembled Battery Powered Micro HHO Generator Art Piece​
$129.95 + Free Shipping​ + Free How-To Plans

*Orders outside the U.S. please use "International" checkout option.​​
Quantity
Assembled $199 + Free Shipping

*Orders outside the U.S. please use "International" checkout option​​










​​​​​​​​​
Separates water into its independent gases Hydrogen + Oxygen

NO explosive HHO gases

Use system to experiment with the beginning process of pure Hydrogen storage​​​​


​​316L 2 Plate 2-3 volts dc electrolysis cell expandable to any size cell stack or input voltage desired

No holes in plates creates a "Zero Current Leakage" design resulting in higher efficiency and lower operating temperatures.​​

External ​​manifold can be installed when more cell stacks are required

Assembled system will include a starter package of electrolyte and balanced reservoir

Purchase of assembled Separator Pod system will also come with free how to plans


Plan set features direct links to all the parts and hardware required to build

​​​​Included with plans will also be a pictorial tutorial with descriptions of how to build this design from start to finish

Plans will also include a printable compression plate drill guide which means no measuring needed to drill bolt holes. ​​

Plans will be sent 1-24 hours after purchase to the email address provided during checkout. Please allow 10-14 business days for shipment of a assembled system. ​​
JdcProducts Hydrogen Separator Cell Plans $20+ Free Shipping Worldwide​
Quantity
Assembled 2 Plate Hydrogen Separator Cell
  The LiL Water Torch 1.0 Fully Assembled
Quantity
High quality micro hho torch kit with multiple tips for various applications and hho cell output ranges. 

Interchangeable curved tip sizes include: ​​0.3 mm (0.5-0.75 LPM), 0.4mm (0.75-1.0LPM), 0.5 mm (1.0-1.5LPM), 0.6mm (1.5-2.0LPM)

Includes needle adapter to accept stainless hub hypodermic nozzles 

Features needle valve adjustment used to control flame or extinguish torch​​

5/16" barb fitting​​
​​

Please allow up to 3 business days for shipment.

*For orders outside the United States, please contact us first for shipping quote. ​​​​
$59 + Free Shipping Within The U.S. 
Quantity
TLWT 1.0
                HHO/Hydroxy/Brown Gas Flashback Arrestor
Micro HHO Generator
Hydrogen/Oxygen Separator Cell
HHO/Hydroxy Micro Pen Torch
  HHO/Oxyhydroygen Generator Washer Dry Cell
The LIL Water Torch 1.0 & 2.0
HM 1000
Battery Operated
Size: C-Cell​
          HHO/OxyHydrogen Generator Stainless Steel Condiment Cup Dry Cell
HHO Washer Dry Cell How-To Plans
$10.00  Digital Email